High wear resistant polyurea microsphere topcoat
- Product Item : HA6475
- Category： Polyaspartic Coatings
- A three-part coating cured by polyaspartic acid ester resin and isocyanate，added organic particles.
Description
|
Composition |
A three-part coating cured by polyaspartic acid ester resin and isocyanate，added organic particles. |
|
Curing method |
Normal temperature curing, 0-35 ℃. |
|
Application |
High abrasion-resistant floor paint Finish. |
|
Features
|
High solid content, low toxicity environmental protection, goodweatherability, semi-matt, high surfacehardness, excellent abrasion resistance. |
|
Package |
B agent was 3.7kg, A agent 0.74kg and C agent 0.55kg.(ratio 100:18:15) |
|
Range of use |
Compared with PA6475-P60, the luster is more dumb. |
Material base data（25℃，60%RH）
|
|
B Agent |
A Agent
|
|
Appearance |
Colorless liquid |
Light yellow liquid |
|
Smell |
Non |
Slight |
|
Viscosity25℃ |
1200MPaS |
12MPaS |
|
Proportion25℃ |
1.1 |
|
|
Solid content |
100% |
|
Mixed material Data（25℃，60%RH）
Viscosity of mixed : 450MPaS
Mixing proportion (without aggregate):1.05
Mixed solids(with aggregate):85%
Potlife : 20min
Dry time:2hr
Walking Opening time: 8hr
Weight opening time: 48days
Operation time and temperature relation
|
|
25℃，50%RH |
30℃，75%RH |
|
Usable time |
20min |
15min |
|
Finger touch |
2hr |
2hr |
|
Finger press |
8hr |
6hr |
Material physical properties after curing
|
Paint film appearance |
Semi-matt light skid-resistant surface |
|
7th hardness |
3H |
|
Wear (CS17 wheel 750g,500 turn) |
15mg |
|
Anti-impact performance（1000g，1m） |
Pass |
Attention:
Construction prohibited when humidity is greater than 85%RH;
The curing agent component meets the water vapor extremely easily to deteriorate, saves must seal dry.
KNOWLEDGE
CONTACT US
Name: Lily Lu
Mobile：86-13922763266
Tel：86-20-38993165
Whatsapp：86-13922763266
Email：lilylu@huisins.com
Add：Room 206, Building 21, LongTeng Xing Cheng, No.68 LongTeng South Road, DongXiao Town, XinLuo District, LongYan City, FuJian Province. China
