Solvent-free drinking water tank coating
- Product Item : 725-H45-66
- Category： Industrial Coatings
- A two pack drinking water tank epoxy coatings.
Product Description:
- Model:725-H45-66
- A two pack drinking water tank epoxy coatings.
- Approved by Ministry of Health of the state for use in contace with potable water.
- VOC less than 50g/L.
Intended Uses:
- For use in drinking water tank.
- For use at Newbuilding, Maintenance and Repair or On Board Maintenance.
Product Information:
|
Volume Solids:100% Finish/Sheen： Gloss |
|
|
Typical Film Thickness |
300microns dry (300microns wet) |
|
Theoretical Coverage(m2/L) |
3.3m2/L at typical film thickness |
|
Mix Ratio: 3.4:1（volume）5:1(mass) |
|
|
Method of Application |
|
|
Airless Spray |
Recommended |
|
Tip size range:0.38-0.53mm |
|
|
Output pressure:≥17MPa |
|
|
Air Spray |
Not recommended |
|
Brush/Roller |
For small area only |
|
Thinner |
Not recommended. |
|
Cleaner |
HX-501 |
|
Induction Period |
Not necessary |
Drying Information:
|
|
10℃ |
25℃ |
35℃ |
|
Touch Dry |
4h |
2h |
1h |
|
Hard Dry |
48h |
20h |
14h |
|
Pot Life |
2h |
1h |
0.5h |
Overcoating Data:
|
Substrate Temperature |
10℃ |
25℃ |
35℃ |
|
Overcoated by |
Min Max |
Min Max |
Min Max |
|
725-H45-66 |
48h 4d |
20h 3d |
14h 1.5d |
Storage:
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size:
Part A: 25kg/15.5L in 20L container
Part B: 5kg/4.5L in 6L container
Flash Point:
Part A: Greater than 50℃
Part B: Greater than 50℃
Mixed pant: Greater than 50℃
Systems and Compatibility:
Consult your sales Representative for the systems best suited for the surfaces to be protected.
KNOWLEDGE
CONTACT US
Name: Lily Lu
Mobile：86-13922763266
Tel：86-20-38993165
Whatsapp：86-13922763266
Email：lilylu@huisins.com
Add：Room 206, Building 21, LongTeng Xing Cheng, No.68 LongTeng South Road, DongXiao Town, XinLuo District, LongYan City, FuJian Province. China
