Waterborne wood coatings-Topcoat 2

Waterborne wood coatings products using the advanced process,are refined by a high-performance water-based polyurethane resins imported from Germany, pigments and fillers, functional additives and other materials,it can be used in surface decoration of wooden furniture ,outdoor wooden facilities for pavilion, paling, corridor, etc .

Inquiry This Item

Inquiry This Item

Inquiry This Product

Full Name(*)
Please type your full name.

E-mail(*)
Invalid email address.

Phone
Invalid Input

Company
Invalid Input

Massage(*)
Invalid Input

Captcha(*)
Captcha RefreshInvalid Input

  • 1、Free of benzene series compounds and heavy metal, non free-TDI;
    2、High hardness and scratch resistance;
    3、Water resistance;
    4、The film is satiation, feel smooth and fine;
    5、Excellent chemical resistance.

  • Brushing or spraying,stirred uniformly before use, if the viscosity is high, diluted with proper water, do not add water more than 10%, and stirred uniformly.
    Sanding primer before painting, free from dust and other debris.
    Keep ventilation when construction.
    If the film dries itself, the minimum temperature is not below 5℃, and the humidity is under 80%. If it is dried at low temperature, the leveling time is above 15 minutes , minimum 25 minutes at 60℃.
    Repainting time is not less than 4 hours.
    Do not mix with other products or organic solvents.
    Wash all tools with water immediately after painting to avoid hardening. The residual paint should be sealed, if there is dry skin, which affect the use, filter with 200 mesh screen before use.

  • Hazard statements/Irritating to eyes, may cause skin allergy. Preventive Action/Avoid breathing dust, fumes, gas, smoke, steam, spray. Wear protective equipment in use, wash hands and other contact parts after the operation. Prohibit discharging into the environment .Incident Response/In the case of contacting with skin (hair):Wash immediately with plenty of soap and water. In case of contact with eyes ,rinse immediately with plenty of water and seek medical aid. If skin irritation or rash occurs :a doctor.Safe storage/Avoid direct sunlight. Stored in a well-ventilated place and keep the container tightly sealed. Separate from acids, alkalis, strong oxidants, food and animal .Waste disposal/Dispose of any paint waste in accordance with the appropriate local Environmental Regulations (please refer to product safety data sheet before use).