Waterborne anti-rust paint-Ship

Introduction:
Refined by modified water-based epoxy resin, epoxy curing agent, pigments, functional fillers, special additives, use water as the dilution, VOC content is lower than the relevant national standards. Easy to construct, fast drying, hard and tenacious coating film. Feels fine when touch. Good protection to the substrate
Applications:
Used in anti-rusting of ship steel above water (except the liquid tank), also steel rust primer and no zinc-coated paint, train, hold, drinking tank, container, etc.

Inquiry This Item

Inquiry This Item

Inquiry This Product

Full Name(*)
Please type your full name.

E-mail(*)
Invalid email address.

Phone
Invalid Input

Company
Invalid Input

Massage(*)
Invalid Input

Captcha(*)
Captcha RefreshInvalid Input

  • 1.High solid content, large besmear brush area;
    2.Super anit-rust resistance、salt spray resistance、solvent resistance、acid and alkali resistance;
    3.Suitable for various metal substrates, strong adhesion;
    4.Dry fastter, easier construction;
    5.Poisonless and tasteless, non-flammable and non-explosive

  • Dipping, brushing, or spraying paint, stirred uniformly before use, if the viscosity is high, diluted with proper water, do not add water more than 10%,and stirred uniformly;
    When be one coat paint, the surface of being painted should be cleaned away oil spots, dust and rust.
    The film can dry itself or be dried at low temperature. If dries itself, the minimum temperature is not below 10
    , and the value of humidity is under 70%.If it is dried, the leveling time is above 15 minutes at room temperature, minimum 25 minutes at 60;
    Do not mix with other products or organic solvents. Wash all tools with water immediately after painting to avoid hardening. The remaining paint should be sealed, if dry skin, affect the use, filter with 100 mesh screen before use.

  • Hazard statements/Irritating to eyes, may cause skin allergy. Preventive Action/Avoid breathing dust, fumes, gas, smoke, steam, spray. Wear protective equipment in use, wash hands and other contact parts after the operation. Prohibit discharging into the environment .Incident Response/In the case of contacting with skin (hair):Wash immediately with plenty of soap and water. In case of contact with eyes ,rinse immediately with plenty of water and seek medical aid. If skin irritation or rash occurs :a doctor.Safe storage/Avoid direct sunlight. Stored in a well-ventilated place and keep the container tightly sealed. Separate from acids, alkalis, strong oxidants, food and animal .Waste disposal/Dispose of any paint waste in accordance with the appropriate local Environmental Regulations (please refer to product safety data sheet before use).