Steel Bridges Protective Coating Paint International Protective Coatings High Performance

With many modern bridges having a lifespan of up to 120 years, the performance of the protective coating used can be a critical factor. In addition, the requirement to reduce the number of repainting cycles has become significant in the overall evaluation of the whole life costs of such structures.

This  is a world leader in the specification and supply of fit-for-purpose coatings for bridges. On well-designed bridges, our high-performance, environmentally preferred coating systems can be expected to last in excess of 25 years before recoating is required.

Choosing a fit-for-purpose bridge coating often requires a wider understanding and consideration of a range of factors including the condition of the structure, possible mechanical or chemical stress and UV exposure. Our experienced technical support team is always available to provide professional advice and to ensure that the correct coating is specified and applied

Feature:

1 excellent cathodic protection.

2 rapid weld and torch cutting property.

3 abrasion,high temperature, flexibility resistance property.

4 good compatibility with most of paints.

Inquiry This Item

Inquiry This Item

Inquiry This Product

Full Name(*)
Please type your full name.

E-mail(*)
Invalid email address.

Phone
Invalid Input

Company
Invalid Input

Massage(*)
Invalid Input

Captcha(*)
Captcha RefreshInvalid Input

  • Specifications:

    Product Name

    Concrete Protective Coatings Rust Proof  Resistant  For  Underwater Bridge

    Density

    1.20g/cm

    Volume solid content

    42%+/- 2%

    VOC

    20g/L

    Theoretical coverage

    0.19kg/sgm (calculated by the above solids percentage and dry film thickness of 100microns)

    Viscosity

    30s

    Pencil hardness

    H

    Salt water resistance

    240Hrs

    Practical coverage

    Allow appropriate loss rate

    Curing mechanism

    Room Temperature cure

    Tack free time

    1-3Hrs

    Recoating internal

    Min:3Hrs,Max:26Hrs

    Overcoating method

    Airless spray, air spray, brush, roller

    Flash point:

    No flammable, no explosive, safe and ECO friendly.

    Shelf Life:

    12 months (indoor with dry and cool conditions, frozen below 0 C)

    1. Dipping, brushing, or spraying paint, stirred uniformly before use, if the viscosity is high, diluted with proper water, do not add water more than 10%,and stirred uniformly;
    2. When be one coat paint, the surface of being painted should be cleaned away oil spots, dust and rust.
    3. The film can dry itself or be dried at low temperature. If dries itself, the minimum temperature is not below 10℃, and the value of humidity is under 70%.If it is dried, the leveling time is above 15 minutes at room temperature, minimum 25 minutes at 60℃;
    4. Do not mix with other products or organic solvents. Wash all tools with water immediately after painting to avoid hardening. The remaining paint should be sealed, if dry skin, affect the use, filter with 100 mesh screen before use.
  • Hazard statements/Irritating to eyes, may cause skin allergy. Preventive Action/Avoid breathing dust, fumes, gas, smoke, steam, spray. Wear protective equipment in use, wash hands and other contact parts after the operation. Prohibit discharging into the environment .Incident Response/In the case of contacting with skin (hair):Wash immediately with plenty of soap and water. In case of contact with eyes ,rinse immediately with plenty of water and seek medical aid. If skin irritation or rash occurs :a doctor.Safe storage/Avoid direct sunlight. Stored in a well-ventilated place and keep the container tightly sealed. Separate from acids, alkalis, strong oxidants, food and animal .Waste disposal/Dispose of any paint waste in accordance with the appropriate local Environmental Regulations (please refer to product safety data sheet before use).