Less (resistance to formaldehyde) interior wall waterborne paint

Refined by perfect combination of the odour-less new technology and film function, characteristic of the negative ion releasing factor, efficient sustained release anion and decompose formaldehyde, can effectively inhibit breeding metope mold for a long time, apply to the new wall coating or the old wall refurbishment of the residential and commercial space

Inquiry This Item

Inquiry This Item

Inquiry This Product

Full Name(*)
Please type your full name.

E-mail(*)
Invalid email address.

Phone
Invalid Input

Company
Invalid Input

Massage(*)
Invalid Input

Captcha(*)
Captcha RefreshInvalid Input

  • 1、Release anion and decompose formaldehyde,purify the air;
    2、Odour-less formula, double mildew;
    3、Good construction and adhesion,excellent alkali resistance;
    4、High durability, scrub resistance;
    5、High hiding power

  • Construction tool: Brush、Roller、Spray gun; a suggestion of using wool brush, short-haired roller, high-pressure airless spray gun.
    Paint Coverage:12-14㎡/Kg/single pass(30microns DFT).Paint consumption varies according to the surface condition of application and proportion of dilution.
    Paint mixing: Mixed uniformity to improve ease of application, must not exceed 20% by using clean water. If using non-gas spray, no more than 10%.
    Substrate treatment: Surface should be clean, dry and stable, moisture <10%, pH<10. Remove unstable old film by high pressure wash or scraper, whichever is appropriate, and then sandpapering.
    Application Condition: The temperature at 5-35℃, relative moisture greater less than 85%; to prevent excessive drying in summer and prohibit baking in winter, closing windows in sand-dust weather.
    Full/Curing Time(30microns DFT at 25-30℃) :
    ●Surface Dry: 30min ●Hard Dry: 60min●Recoating: interval at least 2h
    Cleanout: Clean all the tools with water timely when stopping paint on its way or completing the coating process.
    Storage and Shelf life: Store in a tightly sealed container, cool and dry place at 5-35℃, 12 months.

  • Hazard statements/Irritating to eyes, may cause skin allergy. Preventive Action/Avoid breathing dust, fumes, gas, smoke, steam, spray. Wear protective equipment in use, wash hands and other contact parts after the operation. Prohibit discharging into the environment .Incident Response/In the case of contacting with skin (hair):Wash immediately with plenty of soap and water. In case of contact with eyes ,rinse immediately with plenty of water and seek medical aid. If skin irritation or rash occurs :a doctor.Safe storage/Avoid direct sunlight. Stored in a well-ventilated place and keep the container tightly sealed. Separate from acids, alkalis, strong oxidants, food and animal .Waste disposal/Dispose of any paint waste in accordance with the appropriate local Environmental Regulations (please refer to product safety data sheet before use).