Resistance  Interior Wall Primer

Resistance interior wall primer 3————Formulated by the high-performance acrylic emulsion, high alkali resistance, can effectively prevent the paint damage caused by the alkaline substance oozing from the interior wall, besides the paint film also has good mildew resistance, widely used in the place of all kinds of high environmental protection requirements .

Inquiry This Item

Inquiry This Item

Inquiry This Product

Full Name(*)
Please type your full name.

E-mail(*)
Invalid email address.

Phone
Invalid Input

Company
Invalid Input

Massage(*)
Invalid Input

Captcha(*)
Captcha RefreshInvalid Input

  • 1、Good sealing to preventing moisture to permeate;

    2、highly efficient alkali resistance, to inhibit the efflorescence and discoloration of the paint film;

    3、Good permeability,fast drying, easy to re-coating;

    4、Excluding APEO, without adding heavy metals.

  • Construction tool: Brush、Roller、Spray gun; a suggestion of using wool brush, short-haired roller, high-pressure airless spray gun.

    Paint Coverage:10-12 ㎡/Kg/single pass(30microns DFT).Paint consumption varies according to the surface condition of application and proportion of dilution.

    Paint mixing: Mixed uniformity to improve ease of application, must not exceed 20% by using clean water. If using non-gas spray, no more than 10%.

    Substrate treatment: Surface should be clean, dry and stable, moisture <10%, pH<10. Remove unstable old film by high pressure wash or scraper, whichever is appropriate, and then sandpapering.

    Application Condition: The temperature at 5-35℃, relative moisture greater less than 85%; to prevent excessive drying in summer and prohibit baking in winter, closing windows in sand-dust weather.

    Full/Curing Time(30microns DFT at 25-30℃) :

    ●Surface Dry: 30min ●Hard Dry: 60min●Recoating: interval at least 2h

    Cleanout: Clean all the tools with water timely when stopping paint on its way or completing the coating process.

    Storage and Shelf life: Store in a tightly sealed container, cool and dry place at 5-35℃, 12 months.

  • Hazard statements/Irritating to eyes, may cause skin allergy. Preventive Action/Avoid breathing dust, fumes, gas, smoke, steam, spray. Wear protective equipment in use, wash hands and other contact parts after the operation. Prohibit discharging into the environment .Incident Response/In the case of contacting with skin (hair):Wash immediately with plenty of soap and water. In case of contact with eyes ,rinse immediately with plenty of water and seek medical aid. If skin irritation or rash occurs :a doctor.Safe storage/Avoid direct sunlight. Stored in a well-ventilated place and keep the container tightly sealed. Separate from acids, alkalis, strong oxidants, food and animal .Waste disposal/Dispose of any paint waste in accordance with the appropriate local Environmental Regulations (please refer to product safety data sheet before use).