Resistance Interior Wall Waterborne Primer

Resistance Interior Wall Waterborne Primer, using the high-performance emulsion, the introduction of functional groups, efficient alkali resistance, can effectively prevent the alkaline substances from oozing to damage the finish paint, but also possessed good mildew proof, Apply to indoor wall painting .

Inquiry This Item

Inquiry This Item

Inquiry This Product

Full Name(*)
Please type your full name.

Invalid email address.

Invalid Input

Invalid Input

Invalid Input

Captcha RefreshInvalid Input

  • 1、Nanometers in size: the good permeability and closure.

    2、Efficient alkali resistance: Effectively prevent the coating from discoloring.

    3、Introduction of special functional groups, strong adhesion, a firm base.

    4、Good fit, fast drying, easy construction.

    5、Effectively prevent the mould from breeding.

    6、Free of APEO, no heavy metals.

  • Construction tool: Brush、Roller、Spray gun

    Paint Coverage: 10-12 ㎡/Kg/single pass(30microns DFT). Paint consumption varies according to the surface condition of application and proportion of dilution.

    Paint mixing: Mixed uniformity to improve ease of application, must not exceed 5% by using clean water.

    Substrate treatment: Surface should be clean, dry and stable, moisture <10%, ph<10. remove unstable old film by high pressure wash or scraper, whichever is appropriate, and then sandpapering.

    Application Condition: The temperature at 5-35℃, relative moisture greater less than 85%; to prevent excessive drying in summer and prohibit baking in winter, closing windows in sand-dust weather.

    Drying time:

    ●Surface Dry: 30min         ●Hard Dry: 60min

    Cleanout: Clean all the tools with water timely when stopping paint on its way or completing the coating process.

    Storage and Shelf life: Store in a tightly sealed container, cool and dry place at 5-35℃, 12 months.

  • Hazard statements/Irritating to eyes,may cause skin allergy.

    Preventive Action/Avoid breathing dust, fumes, gas, smoke, steam, spray.Wear protective equipment in use, wash hands and other contact parts after the operation.Prohibit discharging into the environment.

    Incident Response/In the case of contacting with skin (hair):Wash immediately with plenty of soap and water.In case of contact with eyes, rinse immediately with plenty of water and seek medical aid.If skin irritation or rash occurs: a doctor.

    Safe storage/Avoid direct sunlight.Stored in a well-ventilated place and keep the container tightly sealed.Separate from acids, alkalis, strong oxidants, food and animal.

    Waste disposal/Dispose of any paint waste in accordance with the appropriate local Environmental Regulations (please refer to product safety data sheet before use).